Leica FSC Es. They are primarily used for holding docu, Vided, Serted, Adjustable holder

9. Accessories

Large sample stages	Inclining rotating stages ø 75 mm
The stackable large sample stages can be	The inclining rotating stages are likewise
screwed directly onto the motorized cross-stag-	screwed directly onto the motorized cross-stag-
es. They are primarily used for holding docu-	es. After releasing the lever (34.1), you can rotate
ments. Documents can be securely held in place	them horizontally and incline them up to 45° us-
and stretched using the magnetic clamps pro-	ing the built-in ball-and-socket joint (34.2). After
vided (33.1).	positioning the comparison objects, be sure to
	close the clamping system using the lever.
Of course, the large sample stages can also be
used to hold other large-surface carrier materi-	The surface of the stages (which are 75 mm in
al, such as materials bearing toolmarks.	diameter) has a ridged surface (34.3) for fasten-
	ing objects using plasticine. Four bore holes are
	provided, into which stage clips (34.4) can be in-
	serted.
	In the center of the stage plate, there is a coni-
	cal bore hole (34.5), into which all object recep-
	tacles can be inserted (in a similar fashion as
	the adjustable holder).

Fig. 34 Inclining rotating stage ø 75 mm
1	Clamping lever, 2 Ball-and-socket joint, 3 Ridged surface
4	Bore hole for stage clips, 5 Conical bore hole
Fig. 33 Large sample stage (assembly)	5	4
1 Magnetic clamps	3

2

1 1 1 1 1

32