>> It is possible that you are using the wrong code. Start the brand code search, the automatic code search or the di- rect code input (manual).
The URC does not change the station on the device.
>> Press the corresponding device button e to set the URC to the correct mode.
>> In the event that the original RC does not have a
>> If this also does not work the child protection for the target device could be activated.
Some buttons on the URC do not function properly.
>> It is possible that your URC does not have all of the func- tions that are on the device's original remote control.
>> It is possible that you have not programmed in the optimal code. Search for a code that supports more of the target device's functions.
The URC stops reacting after a button is pressed.
>> The batteries must have enough voltage and be properly installed.
>> Point the URC towards your device.
The LCD display q shows nothing.
>> The batteries must have enough voltage and be properly installed.
>> The contrast could be set too low. Increase the contrast setting.
Disposal
Do not dispose of the device in your normal domestic waste. This product is subject to the European directive 2002/96/EC.
Universal remote control
•Have the universal remote control or parts of it disposed of by a professional disposal company or by your commu- nal disposal facility.
•Observe the currently applicable regulations. In case of doubt contact your disposal facility.
Batteries/rechargeable batteries
•Used batteries/rechargeable batteries may not be dis- posed of in household waste.
•Batteries can contain poisons which are damaging to the environment. Therefore, dispose of the batteries/recharge- able batteries in accordance with statutory regulations.
- 22 -
