LAMINATOR KH 4418
1. Intended use
This laminator is intended exclusively for use in priva- te households and for the hot and cold lamination of documents printed on paper or cardboard. Additionally, the documents can be trimmed.
It is NOT intended for use with any other materials. It is also NOT intended for commercial or industrial applications.
The warranty does not provide compensation for damage caused by improper use of the appliance!
3. Appliance description
q Pouch guide (rear) w Cutting rail
e Cutting head
r Pouch format lock
t Slot for manual pouch input y ON / OFF Indicator lamp 
u Indicator lamp "Ready" 
i Selector switch for hot and cold lamination (HOT and COLD)
o
s Document support d Trimming attachment
2. Items supplied | 4. Technical Data | |
|
|
|
1x Laminator KH 4418
10x Laminating pouches DIN A4 for hot laminating
(80 micron)
10x Laminating pouches DIN A5 for hot laminating
(80 micron)
10x Laminating pouches for hot lamination of business cards (80 micron)
1 x Operating Instructions
Nominal voltage: | 220 | - 240 V~ 50 Hz |
Current demand : | 1,6 A | |
Power consumption: | 350 | W |
Laminating speed:
| Foil size | 80 micron |
| 125 micron |
|
|
|
|
|
| A4 | approx. 41 s |
| approx. 51 s |
|
|
|
|
|
| A5 | approx. 30 s |
| approx. 36 s |
|
|
|
|
|
Pouch width: |
| Max. 230 mm | ||
Pouch thickness for hot lamination: | ||||
max. 125 micron
Pouch thickness for cold lamination:
max. 200 micron |
|
Protection class: | II / |
CO time: | 2 hours |
Cooling time: | 1/2 hour |
After two hours of operation the appliance must be allowed to cool down for at least a 1/2 hour. Trimming capacity of the trimming attachment d: max. 3 sheets of 80g/m2
- 2 -
