➩When you have slid the laminating pouch several centimetres into the slot t, it will start to be pulled in automatically. Release the laminating pouch as soon as you notice it being pulled in auto- matically.
Ensure there is at least 30 cm of open space in front of the laminator. If you do not, the laminating pouch will not be completely ejected from the laminator after lamina- tion. This could damage the laminated pouch.
➩The completed laminated pouch is ejected from the pouch ejector slot a of the laminator.
Only after hot lamination:
When the finished laminated pouch is dis- charged from the pouch ejector slot a of the appliance, it is hot and can easily change its shape. For this reason, allow the laminated pouch to cool down for at least one minute before touching it.
To improve the lamination result, you can weigh a still hot laminated pouch down with a book, a file folder or any other heavy, flat object. This helps achieves a flat and flawless surface.
11. Anti-Blocking Switch (ABS)
At the start of the lamination process, the pouch may be pulled in at an angle or jam itself inside the appliance.
➩Turn the
•The laminate pouch is not pulled any further in.
➩Remove the laminate pouch.
➩Turn the
➩
12. Trimming function
Should you wish to use the trimming function on the pouch guide q, dismantle the pouch guide q.
➩If not already done, place the trimming attach- ment d so that it forms a level surface with the pouch guide q.
➩Slide the cutting head e to the end stop (the cutting head e can be slid to both ends of the cutting rail w).
➩Flap the cutting rail w upwards with the rounded grip and position the document on the pouch guide q. Restrain the document by sliding the pouch format locks r together until they touch both sides of the document.
➩Use the markings on the measurement table to align the document precisely.
➩Flap the cutting rail w downwards so that it engages.
➩Hold the paper in a secure position with your left hand.
➩To trim, press the cutting head e down with the right hand and then slide it with one pull or push over the document.
- 7 -
