8. Preparing for hot lamination
➩Insert the pouch guide q into the holes provided on the rear of the laminator.
➩If not already done, fold the trimming attach- ment d down.
➩Pull the document support s out, so that the document can be pulled in straight into the slot for manual pouch input t.
➩Insert the laminator plug into a mains power socket.
➩Ensure the appliance has a stable positioning.
➩Switch the appliance on by placing the selector switch for hot and cold lamination i at "HOT". The red ON / OFF indicator lamp 
y now glows.
Activate the pouch thickness switch o only when the appliance is switched on. Other- wise, the appliance could be irreparably damaged.
➩Place the pouch thickness switch o at the desired pouch thickness (80 or 125 micron).
The laminator now heats itself up to the operating temperature.
•The laminator has reached its operating tempe- rature as soon as the green LED indicator light
"Ready" 
u glows.
Attainment of the operating temperature is indicated by the lighting up of the green
LED indicator lamp "Ready" 
u. For a more uniform laminating result we recom- mend, especially for thinner foils (below 125 Micron) and after adjustment to a dif- ferent foil thickness, to first wait an addi- tional
➩Lay the document to be laminated into a lami- nating pouch of the appropriate size.
Make certain that all corners of the docu- ment have at least two millimetres of space to the edge of the laminating pouch, as shown in Fig. 1. Make certain that you use only one pouch for laminating. First open it up, as shown in Fig. 2.
Fig. 1
For information about the lamination process, please read section 10.
- 5 -
