Operation / Servicing and cleaning / Disposal / Information
jKeep the push stick 12 special spanner 11 counter key 10 and the operating instructions in the holders in or on the table saw.
jAlways keep the saw blades in a secure container.
QServicing and cleaning
Warning! Before you carry out any work on the device always pull the mains plug out of the mains socket.
JWear hand protection when servicing and cleaning!
jNever any kind of sharp object or petrol, solvents or cleaning agents. Do not allow any liquids to enter the inside of the device.
jClean the device after each use.
jFor cleaning, place the machine carefully on its side.
jUse a narrow paintbrush to remove sawdust. You can also blow it away with a compressor.
QDisposal
The packaging is wholly composed of
Do not dispose of electrical power tools with the household rubbish!
In accordance with European Directive 2002 / 96 / EC, worn out electrical power tools must be collected separately and taken for environmentally compatible recycling.
Contact your local refuse disposal authority for more details of how to dispose of your
QInformation
QService centre
The service centre for your country is shown in the warranty documentation.
JHave your device repaired only by qualified specialist personnel using original manufacturer parts only. This will ensure that your device remains safe to use.
JIf the plug or mains lead needs to be replaced, always have the replace- ment carried out by the manufacturer or his service centre. This will ensure that your device remains safe to use.
QDeclaration of Conformity / Manufacturer 
We, Kompernaß GmbH, Burgstr. 21,
44867 Bochum, Germany, declare that this product complies with the following EU directives:
Machinery Directive (98 / 37 / EC):
EN
EU Low Voltage Directive (73 / 23 / EEC), (93 / 68 / EEC):
EN
Electromagnetic compatibility (89 / 336 / EEC), (92 / 31 / EEC), (93 / 68 / EEC):
EN
Description / Model type:
Table saw PTKS 1800 SE
Bochum, 30.04.2008
Hans Kompernaß
- Managing Director -
We reserve the right to make technical modifications in the course of further development.
GB/MT 39
