Safety / Preparing for use

JCheck the electrical power tool for damage. Before the electrical power tool is used any fur- ther, carefully check the safety equipment or any slightly damaged parts to see that they are still working properly. Check that all moving parts on the tool are working properly, can move freely and are not damaged. All parts must be correctly attached and fulfil all the requirements necessary to allow the electrical power tool to operate properly. Damaged safety equipment and components should be repaired or replaced at a competent electrical equipment repair centre unless otherwise indi- cated in the operating instructions. Damaged switches must be replaced at a Customer Service Centre. Never use an electrical power tool that cannot be switched on and off properly.

Advice on structural engineering matters Slots in load-bearing walls:

Slots cut in load-bearing walls must comply with DIN 1053 Part 1 or the regulations applicable in your country.

Observe the requirements of these documents. Be- fore you start a task, seek the advice of a compe- tent structural engineer, architect or the relevant site management staff.

QAdvice on use

Note! Discs must be used only for their recommended purposes, otherwise they could disintegrate, become damaged or cause accidents.

Roughing discs

Never use cutting discs for roughing or grinding!

JMove the angle grinder using even pressure to and fro over the workpiece.

JHold the roughing or grinding disc at a flat angle to the workpiece when working on a soft material. Use a slightly steeper angle for harder materials.

12 GB/IE/CY

Cutting discs

Never use roughing or grinding discs for cutting!

m Danger! Always guide the

device through the workpiece

against the direction of rotation of the disc. If you work in the

other direction there is the risk of kickback. The device may be forced out of the cut.

QOriginal accessories / attachments

JUse only the accessories and attachments de- tailed in the operating instructions. The use of parts or accessories other than those recom- mended in the operating instructions could lead to you suffering an injury.

QPreparing for use

Take note of the mains voltage. The mains voltage at the mains socket must match that shown on the rating plate on the device. Devices marked with 230 V can also be operated at 220 V.

QAttaching the disc guard cover using the quick-release fastener

JPull the mains plug out of the mains socket be- fore you carry out any task on the device.

mDanger of injury! Always use the angle grinder with the disc guard cover in place. The disc guard cover must be securely attached to the angle grinder. To ensure the highest level of safety while using the device, ensure that the smallest possible area of the grinding or cutting tool is exposed to the operator at all times. The disc guard cover is there to protect the operator from pieces breaking off and accidental contact

with the grinding or cutting tool. j Open the clamping lever 8 .

Page 9 Page 11
Page 10
Image 10
Kompernass PWS 230 manual Safety / Preparing for use, Advice on use, Original accessories / attachments
Page 9 Page 11

PWS 230 specifications

The Kompernass PWS 230 is a cutting-edge power tool designed for both home enthusiasts and professional tradespeople. Renowned for its precision and versatility, this tool has carved a niche for itself in the market, making it a favorite for those who value efficiency and top-notch performance in their woodworking projects.

One of the standout features of the PWS 230 is its robust motor, which operates at a powerful 2300 watts. This high wattage allows for exceptional cutting capabilities, enabling the user to easily handle various materials, from softwoods to harder woods and even light metals. The motor is paired with an advanced gearbox that optimizes torque and helps maintain consistent power output, reducing the possibility of stalling during demanding tasks.

The PWS 230 is equipped with a laser guide system, which provides enhanced precision when cutting. This technology projects a clear line on the material, allowing users to make accurate cuts with ease. Alongside this, the tool features an adjustable cutting depth mechanism, giving users the flexibility to choose how deep they want to cut into their materials, making it suitable for both shallow and deep applications.

Another noteworthy characteristic of the PWS 230 is its ergonomic design. The tool incorporates a comfortable grip and a lightweight frame, reducing user fatigue during prolonged use. The balanced weight distribution further enhances control, making intricate cuts more manageable. Additionally, the built-in safety features, such as a blade guard and start-up protection, ensure that operators can work with peace of mind.

Portability is also a key feature of the Kompernass PWS 230. It is designed for easy transportation, with onboard storage for accessories and a secure carrying handle, allowing users to move from job site to job site without hassle.

In summary, the Kompernass PWS 230 stands out in the competitive world of power tools by combining powerful performance, precision cutting technology, ergonomic design, and safety features. Whether for professional use or DIY projects, it delivers impressive results that meet the needs of modern users, making it an invaluable addition to any toolkit.
Top Page Image Contents