Preparing for use / Operation , Switching on and off

Preparing for use / Operation

jInsert the disc cover guide 7 with the coded projection 9 in the coded groove 16.

jTurn the disc guard cover 7 into the desired position (working position). The closed side of the disc guard cover 7 must always be facing the operator.

jClose the clamping lever 8 to firmly clamp the disc guard cover 7 in place.

If necessary the clamping force of the connection can be adjusted by tightening or loosening the adjuster screw 10.

Ensure that the disc guard cover 7 sits firmly on the spindle collar.

QAttaching the auxiliary handle

mCaution! For safety reasons this device must always be used with the auxiliary handle 6 in

place.

JPull the mains plug out of the mains socket be- fore you carry out any task on the device.

jScrew the auxiliary handle 6 on the left, right or on the top of the head of the device.

QAttaching and replacing roughing / grinding / cutting discs

Take note of the dimensions of the roughing / grind- ing or cutting discs. The circular hole must fit on to the mounting flange without play. Do not use a re- ducer piece or adapter.

JPull the mains plug out of the mains socket be- fore you carry out any task on the device.

JCheck the condition of the roughing / grinding or cutting discs. They must be free of damage, moisture or cracks.

mDanger of burns! Always wear protective gloves when changing a roughing / grinding or cutting disc. Roughing / grinding and cutting discs become hot during use. Do not touch

them until after they have cooled down.

jNote: Always ensure the discs are free of dirt before use.

jUse only abrasive consumables or tools with an allowable speed at least as high as the no-

load speed of the device.

jPress the spindle lock button 11 only after the mounting spindle 14 has reached a standstill.

jPress the spindle lock button 11 to block the drive.

jRelease the clamping nut 13 using the spanner 17, Fig. C.

jPlace the roughing / grinding or cutting disc on to the mounting flange 15 with its labelled side facing towards the device.

jThen replace the clamping nut 13, with its raised side facing upwards, on to the mounting spindle 14.

jPress the spindle lock button 11 to block the drive.

jTighten the clamping nut 13 again with the spanner 17.

jNote: Replace a new disc immediately if it runs unevenly or vibrates after being exchanged.

jAfter replacing a disc let the device run under no-load conditions for 30 seconds as a safety check. Look out for unusual noises or generation of sparks. Check that all the fastened-on parts are correctly attached.

jPay attention to see that the arrow showing the direction of rotation on the roughing / grinding or cutting discs (including diamond cutting discs) corresponds with the direction of rotation of the device (see arrow on the head of the device).

QOperation

QSwitching on and off

Note: Always switch on the angle grinder before bringing it into contact with the workpiece material.

Switching on the device

jPress the safety lock-out 3 .

Then press the ON / OFF switch 2

Switching off the device

j Release the ON / OFF switch 2 .

GB/IE/CY 13

PWS 230 specifications

The Kompernass PWS 230 is a cutting-edge power tool designed for both home enthusiasts and professional tradespeople. Renowned for its precision and versatility, this tool has carved a niche for itself in the market, making it a favorite for those who value efficiency and top-notch performance in their woodworking projects.

One of the standout features of the PWS 230 is its robust motor, which operates at a powerful 2300 watts. This high wattage allows for exceptional cutting capabilities, enabling the user to easily handle various materials, from softwoods to harder woods and even light metals. The motor is paired with an advanced gearbox that optimizes torque and helps maintain consistent power output, reducing the possibility of stalling during demanding tasks.

The PWS 230 is equipped with a laser guide system, which provides enhanced precision when cutting. This technology projects a clear line on the material, allowing users to make accurate cuts with ease. Alongside this, the tool features an adjustable cutting depth mechanism, giving users the flexibility to choose how deep they want to cut into their materials, making it suitable for both shallow and deep applications.

Another noteworthy characteristic of the PWS 230 is its ergonomic design. The tool incorporates a comfortable grip and a lightweight frame, reducing user fatigue during prolonged use. The balanced weight distribution further enhances control, making intricate cuts more manageable. Additionally, the built-in safety features, such as a blade guard and start-up protection, ensure that operators can work with peace of mind.

Portability is also a key feature of the Kompernass PWS 230. It is designed for easy transportation, with onboard storage for accessories and a secure carrying handle, allowing users to move from job site to job site without hassle.

In summary, the Kompernass PWS 230 stands out in the competitive world of power tools by combining powerful performance, precision cutting technology, ergonomic design, and safety features. Whether for professional use or DIY projects, it delivers impressive results that meet the needs of modern users, making it an invaluable addition to any toolkit.

Kompernass PWS 230 manual Preparing for use / Operation , Attaching the auxiliary handle

Models: PWS 230