Kompernass WT 40458 manual Power supply, Setting up the device, Connecting the transmitter

•Composite video signal (CVBS) CVBS (colour, video, blank and sync), generally called composite video, refers to a normal video connection

(VIDEO). The video signal is carried by a CINCH cable, generally labelled in yellow.

•SCART (EURO-SCART) Abbreviation for Syndicat des Con- structeurs d´Appareils Radio Recep- teurs et Televiseurs. This is a French association for the radio and television industry. The connector is standardised

21-pin plug that is used between the television set and connected compo- nents, for example.

•AV socket

Abbreviation for audio/video socket.

Interface for transmitting sound and image signals (see SCART, CINCH).

•Video signal

Electrical information that results in conversion of a real image into an electronic signal. The video signal has precisely defined properties and meets the currently applicable standard for video transmission.

•Frequency

Number of oscillations or repetitions of a signal per second, measured in

Hertz (Hz).

Power supply

The included connector power packs were certified by TÜV Rheinland. They are intended for operation on a 230V~/ 50Hz mains network.

Setting up the device

First remove all device components from the packaging and remove all packing foil and tape.

Important notice:

Even when the system (transmitter + receiver) is switched off, the manufac- turer still recommends disconnecting the connector power pack from the power network or using a power strip with a shut-off switch. Only this way can it be ensured that the device is completely powered down in the in- terests of economical use of power. Before starting up the device, please remove the notice from beneath the audio/video antenna.

Connecting the transmitter

Note:

Select a transmission source.

•SAT receiver/set top box

•DVD/CD player

•VCR

•PC, etc.

You can transmit video and audio signals from the selected transmission source.

Connecting the transmission source to the transmitter:

•Connect the SCART double adapter (1() with a CINCH (RCA) cable (2!).

•Connect the CINCH (RCA) cable (2!) with the transmitter (e).

- 6 -