Connecting iSCSI Ports to the Server

22

Connect iSCSI data ports on iSCSI storage systems directly to a server, or to an Ethernet LAN and connect the server iSCSI data ports to either a 10/100 or 1-gigabit Ethernet LAN, as described in this section.

Before You Start

To complete this procedure, you will need:

An Administrative Worksheet completed with your network administrator in accordance with the rules and recommendations in Procedure 3, "Planning Your iSCSI Storage System Configuration," on page 15. The TCP/IP rules outlined in the "iSCSI Configuration Rules" section are crucial to a successful installation. For example, each NIC in a server directly connected to the storage system requires a separate subnet.

One LAN cable per storage system iSCSI port that you will connect to the server or network. You can use CAT 5, CAT 5e, and CAT 6 LAN cables up to 100 meters to connect the storage-system iSCSI ports (labeled iSCSI-1000 on each SP) to an Ethernet port on a server.

One LAN cable per server iSCSI port that you connect to the network. You need CAT 5 LAN cables for iSCSI connections to 10/100 LANs or CAT 6 cables for iSCSI connections to 1-gigabit LANs. These cables can be up to 100 meters.

STEP 1. For each iSCSI port on the storage system, connect one end of a LAN cable to the iSCSI 0 or iSCSI 1 port on the SP and the other end:

directly to a NIC or iSCSI HBA in a server (Figure 58 or Figure 59), or

to a router or switch (Figure 60 or Figure 61) for network connections.

STEP 2. For each NIC or iSCSI HBA port on the server, connect one end of a network cable (CAT 6 for 1-gigabit Ethernet network, CAT 5 for 10/100 LAN) to the iSCSI port on the NIC or iSCSI HBA and the other end to the network (Figure 60 or Figure 61).

Intel Storage System SSR212PP User Guide

117

Page 131
Image 131
Intel manual Connecting iSCSI Ports to the Server, Intel Storage System SSR212PP User Guide 117