Installing the Navisphere

Storage System

Initialization Utility

17

Before You Start

You will need the SSR212PP-Series Server Support Products CD for this procedure.

Installing on a Windows Host

STEP 1. Insert the SSR212PP-Series Server Support Products CD into the CD drive of a Windows host on the same subnet as the storage system.

STEP 2. Select your language, if prompted for it.

STEP 3. From the main menu, click Install Utilities on Server.

STEP 4. From the Install Products menu, click Navisphere Storage System Initialization Utility to open the installation wizard.

STEP 5. Proceed until the installation is complete. A user interface (UI) and a text-based version of the utility are installed.

STEP 6. Remove the CD from the host s CD drive.

Installing on a Linux Host

STEP 1. Insert the SSR212PP-Series Server Support Products CD into the CD drive of a Linux host on the same subnet as the storage system.

STEP 2. Install the Navisphere Storage System Initialization Utility on the Linux host :

rpm -ivh naviinittool-version-build.i386.rpm

where version and build are the version number and the build number of the Navisphere Storage System Initialization Utility on the CD. For example, 6.19.1.1.10.

If you are upgrading the utility on the server, use -Uin place of -i.

STEP 3. When installation is complete, remove the CD from the host s CD drive.

Intel Storage System SSR212PP User Guide

103

Page 117
Image 117
Intel SSR212PP manual Installing on a Windows Host, Installing on a Linux Host