CAUTION

The bezel is required for EMI compliance when the storage system is powered up. Remove it only to replace or add a disk module.

a.Insert the key that shipped with your storage system into the bezel lock, and turn it to release the lock (Figure 33).

b.Press the two latch buttons on the bezel surface toward each other to release the bezel from the cabinet (Figure 33).

c.Pull the bezel off the cabinet and put it on a clean, static-free surface.

SAB2937

FIGURE 33. Unlocking and Removing the Front Bezel

STEP 3. Locate the slot where you want to install the disk module, and remove the filler module (Figure 34).

Filler

EMC2810

FIGURE 34. Removing a Disk Filler Module

88

Intel Storage System SSR212PP User Guide

 

Revision 1.0

Page 102
Image 102
Intel SSR212PP manual Unlocking and Removing the Front Bezel