Installing the SSR212PP- Series Storage System

11

Read this section if you are installing a new storage system.

Install the storage system in a 19-inch NEMA-standard cabinet/rack.

Before You Start

To complete this procedure, you need the mounting hardware that shipped with the storage system.

Installing the Storage System in a Cabinet

STEP 1. Install each rail in the cabinet (Figure 25):

a.From the front of the cabinet, insert the alignment pins in the rear channel of the cabinet.

Insert the pins in the 1/2-inch space between channel holes, which aremarked by a dash ( ) in some cabinets.

b.Pull the adjustable rail forward, and attach it with two screws to the inside of the front channel in the two center holes.

c.From the rear of the cabinet, secure each rail to the rear channel. Leave the screws slightly loose to allow for adjustment after you load the storage system on the rails.

Intel Storage System SSR212PP User Guide

79

Page 93
Image 93
Intel manual Installing the SSR212PP- Series Storage System, Installing the Storage System in a Cabinet