/etc/init.d/iscsi start
STEP 5. Run the Navisphere Server Utility to update the storage system with the server information.
Configuring Basic CHAP on a Server with iSCSI HBAs
Configure basic initiator CHAP on each iSCSI HBA that communicates with the server:
STEP 1. Open the SANsurfer software.
STEP 2. Click the Target Settings tab.
STEP 3. Click Config Authentication on the bottom of the pane.
The default password is config.
STEP 4. Select the CHAP tab.
STEP 5. Under Initiator Name and Secret:
a.Click Enable for your target IP.
b.Select Set default initiator name and secret.
c.Type in the initiator name for your HBA initiator. This name must match the username for the storage system.
d.Type in the secret that you configured in Navisphere Express.
The Initiator Name and Initiator Secret fields in the middle window display will populate automatically.
e.Click OK.
STEP 6. Save your changes on the Target Settings window; (the default password remains config).
STEP 7. Verify that your session remains active.
148 | Intel Storage System SSR212PP User Guide |
| Revision 1.0 |
