Intel SSR212PP manual Sliding the Chassis into the Cabinet

install the unit into a rack without a mechanical lift and/or help from another person.

STEP 4. From the front of the cabinet, slide the storage system onto the rails so that the cutouts in the rear of the chassis fit into the tabs on the back of each rail ( Figure 27).

If the chassis does not slide all the way into the cabinet, you may need to further loosen the screws that hold the rear of the rails in place; then adjust the rail to allow the tabs to fit into the cutouts.

EMC2799

FIGURE 27. Sliding the Chassis into the Cabinet

STEP 5. Use the four latch bracket screws to secure the storage system and latch brackets to each front channel (Figure 28).

STEP 6. Snap the front bezel onto the storage system (Figure 28).

AF000637

FIGURE 28. Securing the Chassis and Installing the Front Bezel

Intel Storage System SSR212PP User Guide 81