Intel SSR212PP manual Installing a Second Power Supply

Installing a Second Power Supply

12

Read this section if you received a second power supply for your single-SP storage system.

You may receive a second power supply that looks slightly different from the original, and/or different from the illustrations in this note. The two versions are functionally the same.

For greater clarity, the illustrations in this note show the storage system chassis independent of a cabinet or deskside mounting hardware.

STEP 1. Read "Handling Field-Replaceable Units (FRU)" on page 59. If possible, have an ESD wriststrap attached to your wrist as you perform the following steps.

STEP 2. Push the slide latch to the left as you pull the power supply filler module straight out of the chassis (Figure 29).

Slide Latch

EMC3255

FIGURE 29. Removing a Power Supply Filler Module

STEP 3. Gently insert the new power supply straight into the storage system, being sure to completely seat the supply (Figure 30).

Intel Storage System SSR212PP User Guide 83