#Password=welcome
#or
#OutgoingUsername=john
#OutgoingPassword=welcome
#The "OutgoingUsername" will specify the username to be sent to the target
#for login authentication. The "OutgoingPassword" is the CHAP secret password
#to be used when sending challenge responses to the target.
#You may configure CHAP authentication settings that will apply to every
#target discovered at a particular address by adding "OutgoingUsername=u"
#and "OutgoingPassword=p" entries indented below the "DiscoveryAddress"
#entry they apply to.
#
# Example:
#DiscoveryAddres=127.0.0.1 (Storage System1 SPA)
#Username=john
#Password=welcome
#DiscoveryAddres=127.0.0.2 (Storage System1 SPB)
#Username=betty
#Password=bienvenue
#or
#DiscoveryAddress=127.0.0.1 (Storage System1 SPA)
#DiscoveryAddress=127.0.0.2 (Storage System1 SPB)
#DiscoveryAddress=127.0.00.1 (Storage System2 SPA)
#DiscoveryAddress=127.0.00.2 (Storage System2 SPB)
#Username=john
#Password=welcome
#DiscoveryAddres=127.0.0.3 (Storage System3 SPA) #DiscoveryAddres=127.0.00.3 (Storage System3 SPB)
#Username=betty
#Password=bienvenue
#You can configure 2 WAY authentication to enable the authentication of the
#initiator by the target and
#Password" fields specify the initiator authentication and "IncomingUsername"
#and "IncomingPassword" can be used for target authentication.
#The "IncomingUsername" will specify
must be received from
#target if login authentication occurs. "IncomingPassword" is the CHAP
#secret to be used when verifying challenge from the target.
#The "OutgoingPassword" and "IncomingPassword" should be unique.
#Example:
#
#OutgoingUsername=alice
#OutgoingPassword=foo
#IncomingUsername=alice3
Intel Storage System SSR212PP User Guide | 145 |