GENERAL

CONNECTING AND INSTALLING THE UNIT

Open the battery cover and insert the SIM card as illustrated.

Unlock

Push SIM card down

Lock

SIM card (under battery)

Insert the battery as shown in the picture.

The Konftel 300M starts up and after a while an input window for the PIN code is shown in the display.

Enter the SIM card’s PIN code and confirm with OK.

You can opt to press C instead of entering your PIN code to start up Konftel 300M in USB mode.

Place the conference phone in the middle of the table.

Place the conference phone at least 20 cm from the users.

USB mode

If the telephone is started up without a SIM card or if you press C during start-up when the telephone asks for the PIN for the SIM card, the telephone will start up in USB mode instead. This is indicated by the display showing the text USB instead of signal strength.

In USB mode all settings and options relating to mobile calls are removed. Instead a new option appears in the settings menu: MENU > SETTINGS > ENABLE SIM. This restarts the telephone so that the PIN code can be entered.

8

Page 10
Image 10
Konftel 300M manual General, Connecting and Installing the Unit, USB mode,  Insert the battery as shown in the picture