CONNECTING TO WINDOWS 98 / 98 SECOND EDITION

The driver needs only to be installed once. If the driver cannot be installed automatically, it can be installed manually with the operating systemís add-new-hardware wizard; see the instructions on the following page. During installation, if the operating system requests the Windows 98 CD-ROM, inset it into the CD-ROM drive and follow the accompanying instructions on the screen. No special driver software is required for other Windows operating systems.

Automatic Installation

Before connecting the camera to the computer, place the DiMAGE Viewer CD-ROM in the CD-ROM drive. The DiMAGE installer menu should

automatically activate. To automatically install the Windows 98 USB driver, click on the starting-up- the-USB-device-driver-installer button. A window will appear to confirm that the driver should be installed; click ìYesî to continue.

When the driver has been successfully installed, a window will appear. Click ìOK.î Restart the computer before connecting the camera (p. 143).

144DATA-TRANSFER MODE