Using the remote control

Emitter window

Release button

Controller

Digital-zoom buttons

Information display button

Battery chamber

With the camera on a tripod, position the subject within the focus frame.

Point the remote controlís emitter window toward the cameraís self-timer lamp/remote-control receiver.

Pressing the information display button changes the display format, see page 43.

Digital zoom (p. 102) is activated by the digital-zoom buttons.

Press the release button or the center (2s) button of the controller to take the picture. The central button delays the release of the shutter for approximately two seconds; the self- timer lamp and the audio signal indicates the countdown. The self-timer lamp glows steadily just before the shutter releases. The release button fires the shutter without a delay. If the flash is used, the shutter is released after the flash has charged.

The focus and exposure are set when the release button or the central button of the controller is pressed.

When recording movies or bulb exposures, pressing the release button or the central button of the controller once starts the exposure; pressing the button a second time ends it.

79