USING THE DRIVE-MODE BUTTON

The drive mode is set with the

 

drive-mode button.

The

drive

 

modes

control

the

rate

and

1

method

images

are

captured.

 

Indicators showing the selected drive mode appear on the monitors.

Single

2

:move :enter 3

Press the drive-mode button (1); the drive-mode setting screen appears.

Use the up/down keys of the controller to highlight the the new drive mode (2). Use the left/right keys to select the drive mode options (3). Press the center of the controller or

press shutter-release button partway down to complete the operation. Pressing the menu button cancels the operation.

Also see the camera notes on page 69.

Single-frameadvanceSelf-timerRemote controlBracketingContinuous

advance

To take a single image each time the shutter-release button is pressed (p. 30).

To delay the release of the shutter by 2 or 10 seconds. Used for self-portraits (p. 77).

To operate the camera with the remote control unit (p. 78).

To take a series of three images with differing exposure, or white balance (p. 80).

To take a series of three images when the shutter- release button is pressed and held (p. 82).

76ADVANCED RECORDING