1.Enter the IP address of the Konica Minolta machine into Internet Explorer and press Go
2.Log into the web page using the Admin code for the machine.
Default = 12345678.
3.Click on the Network tab at the top of the screen
4.Then click on LDAP Setting and set to Enable
4)Select “Setting Up LDAP” and select any available radio button. we will assume Hot2003 does not exist.
5. Select “Edit”
6.Enter you network settings in the dialogue box’s including password. The copier will use the Admin credentials to interrogate LDAP (none of this is seen by end user)
