Konica Minolta Di1610p user manual Placing the Original on the Original Glass

Before Making Copies Chapter 3

3 3.8 Loading Originals

Placing the Original on the Original Glass

The method for positioning the original differs depending on the type of original being used.

Precautions for Placing the Original on the Original Glass

Care should be taken when positioning the following types of originals.

An original of a non-standard size:

The document size cannot be detected automatically. Press the [Paper] key or the [Zoom] key, and then select the desired paper size (p. 4-4) or zoom ratio (p. 4-10).

A highly transparent original (OHP transparencies, translucent paper, etc.):

Place a blank sheet of paper of the same size over the original.

A book or other three-dimensional object:

Let the machine scan the contents of the original with the Original Cover or the Auto Document Feeder raised. Do not attempt to push the Original Glass with excessive force, as a malfunction could result. (The maximum load resistance of the Original Glass is 6-1/2 lb.)

Note

While scanning with the Auto Document Feeder or Original Cover open, do not look directly at the bright light that may shine through the Original Glass. Although the light that shines through the Original Glass is bright, it is not a laser beam and, therefore, is not as dangerous.

3-24 Di1610/Di1610p