Precaution Chapter 2
2 | 2.1 Installation Precautions |
|
Observe the following precautions to maintain the machine in its best possible condition.
2.1Installation Precautions
Installation Site
To ensure utmost safety and prevent possible malfunctions, install the machine in a location that meets the following requirements:
-A location away from curtains, etc. that may catch fire and burn easily
-A location that is not exposed to water or other liquids
-A location free from direct sunlight
-A location out of the direct airflow of an air conditioner or heater, and not exposed to extremely high or low temperatures
-A
-A location that is not exposed to high humidity
-A location that is not extremely dusty
-A location not subjected to undue vibrations
-A stable and level location
-A location where ammonia or other organic gases are not generated
-A location that does not put the operator in the direct airflow of exhaust from the machine
-A location that is not near any kind of heating devices
Power Source
The power source requirements are as follows.
Voltage Fluctuation: AC110 V
Frequency Fluctuation: Within ±3Hz
❍Use a power source with as few voltage or frequency fluctuations as possible.
Di1610/Di1610p |
