Measurement

3) Ending the Measurement

Press the Power button for a long time, the measurement is finished and the Power is off.

About Auto-Power-Off function

By connecting the instrument to a personal computer and using the optional software, the time to be elapsed from power-on (start of measurement) to power-off (end of measurement) can be set as the auto-power-off timer.

If an auto-power-off timer is set, the measurement is finished automatically in the time after power-on.

Regarding the memory function

●The memory built into the PULSOX-300i will continue to hold data even if the battery is removed.

●A maximum of 300 hours of measurement data can be stored; e.g., 10 hours of measurement data can be stored for 30 persons. Storage for measurement data is set up in 30-minute blocks, so even if the duration of measurement data is less than 30 minutes, it will be treated as a 30-minute block. For this reason, if measurement data with durations of shorter than 30 minutes are stored, the actual measurement duration will be different from the stored duration, and the maximum storable time will be shorter than 300 hours.

●The maximum storable number of data files is 399 files. After that, the No. 400 data file will be stored as data file No. 1, overwriting the previous No. 1 data file.

20