<Regarding the display in communication mode>
●When the PULSOX-300i is connected to a computer, the PULSOX-300i will enter UA communication mode automatically. In UA communication mode, the display will appear as shown below:
This shows the PULSOX-300i is in UA communication mode. The instrument is connected to the computer with the UA-300.
T h i s s h o w s m e a s u r e d d a t a i s b e i n g downloaded to the computer. Do not remove the UA cable and/or USB cable from the PULSOX-300i and/or the computer.
<Notes on communication mode>
●It is impossible to take measurements while the instrument is in communication mode.
●When removing the PULSOX-300i from the UA-300, the power of the instrument will be set to OFF automatically.
