●Automatic power-off operation

If the camera is left without operation for more 5 minutes as it is turned on, the automatic power-off function is activated to turn off the data display panel and LCD monitor, therefore, the batteries are prevented from getting consumed.

To cancel the automatic power-off mode after it is activated, slide the lens barrier switch upwards to set it at the “CLOSE” position once and again slide it downwards to set it at the “OPEN” position to turn on both the indicator panel and LCD monitor.

At that time, reset the shooting mode depending on the situa- tion because it was canceled with activation of the automatic power-off function.

Automatic power-off function is also activated when the AC adaptor is used.

※After shooting is complete, close the lens barrier without fail to protect the lens.

※If the camera is turned off as the lens barrier is open, set the lens barrier switch at the “CLOSE” position once and then slide it to the “OPEN” position again to turn on the camera for shooting.