Konica Minolta Q-M100 Getting icons to appear on TV screen

①②

③ ④ ⑤

⑥⑦

Getting icons to appear on TV screen

①Setting of frame protection

② Erase

③ Information on Frame protection

④ Image quality mode

⑤ Frame number

⑥ Index playback

⑦ Slide show

※Select a desired icon with the SELECT button.

●In the condition that a TV set is used to play back pictures, available functions are limited to those mentioned below.

When a picture is played back with a TV set, data and time when the pic- ture was taken don’t appear on the screen.

Only four icons that respectively represent “Setting of frame protection”, “Erase”, “Index playback” and “Slide show” functions can be shown on a TV screen, and two of them can be shown on the screen at a time.

For selecting other functions, disconnect the TV set and select a desired function with the picture appearing on the LCD monitor.

For details of respective functions, refer to explanation of “Applied opera- tion”.

○Don’t connect/disconnect video output cord to/from the video port during setting operation, otherwise previous setting is canceled.

○Don’t connect/disconnect the video output cord while the card access warning lamp is on, otherwise the CF card or stored data may be dam- aged.