![](/images/new-backgrounds/1245387/24538783x1.webp)
Care and Storage
Cleaning the Camera
When cleaning the camera, do not use solvents such as benzene or paint thinner.
Before cleaning, remove the batteries from the camera, or disconnect the power plug of the AC adaptor from the wall outlet.
The exterior casing surface consists of paint and printing. Wiping the casing with benzene or paint thinner may cause discoloration, or the paint or printing to be removed.
If the camera becomes dirty, wipe off the dust with a soft, dry cloth.
For stubborn dirt, dampen a cloth in diluted neutral detergent (kitchen detergent), wring thoroughly and wipe. When finished, wipe the camera with a dry cloth.
If using a chemical cloth, follow the safety precautions for the product.
After Using the Camera
If the camera is not to going to be used for a long period, remove the batteries and ensure that the power plug of the AC adaptor is disconnected from the wall outlet.
Leaving the batteries inside the camera for a long time may cause the battery fluid to leak, resulting in malfunction of the unit.
When storing, keep both camera and batteries in a cool place with low humidity and under a constant temperature as far as possible.
Recommended temperature:15oC~25oC (59oF~77oF) Recommended humidity:40%~60%
About Handling the SD Memory Card
Do not bend or apply excessive force.
Do not store the card in places with high humidity, in dusty places or where static electricity or electromagnetic fields are likely to occur.
Keep dust, water and foreign objects away from the terminal section.
About Image Data
Use a PC to delete images and files recorded with other models.
The recorded data may be lost if you or a third party misuse the SD memory card, if the card is affected by strong static electricity or electrical shock, or during card malfunction. Konica will not be responsible in any way for the loss of recorded data or the consequences of such loss.
About the LCD Monitor
The LCD monitor has been developed using
Although the percentage of active pixels is more than 99.98%, there may be missing or constantly lit pixels.
When using the LCD monitor in a cold location, the screen may appear darker than normal immediately after starting use. The screen will return to normal brightness as the internal temperature of the camera rises.
If the LCD monitor becomes dirty with fingerprints or dust, wipe with a soft, dry cloth.