Problem

Symptom

Cause

Solution

 

 

 

 

 

 

 

Make sure the subject is within

 

 

Subject is too close.

the autofocus range (p. 24) or

 

 

 

use the macro mode (p. 28).

 

 

 

 

 

Focus signal is

The camera is in macro

Cancel the macro mode setting

 

red.

mode.

(p. 28).

Pictures are

 

 

 

 

A special situation is pre-

Use the focus-lock function to

not sharp.

 

venting the autofocus

focus on an object at the same

 

 

system from focusing

distance as the subject (p. 24)

 

 

(p.25)

or use manual focus (p. 56).

 

 

 

 

 

Pictures are

Slow shutter speeds

Use a tripod, change the cam-

 

taken indoors

 

result in blurred images

era sensitivity to a higher set-

 

or in low-light

 

when the camera is

ting (p. 50), or use the flash (p.

 

situations with-

 

out flash.

hand-held.

30).

 

 

 

 

 

 

 

Continuous

 

 

Change the image-quality set-

drive does

The image quality is set to super fine.

ting (p. 38, 50).

not work.

 

 

 

 

 

 

 

 

 

While using

 

 

Move closer to the subject or

flash, the pic-

 

The subject is beyond

 

change the camera sensitivity

tures are too

 

the flash range (p. 57).

 

to a higher setting (p. 50).

dark.

 

 

 

 

 

 

 

 

 

„Err“ dis-

Turn off the camera and remove and reinsert

the batteries, or unplug and

reconnect the AC adapter. If the camera is hot, allow it to cool before remov-

played on the

ing the batteries and Compactflash card.

 

data panel.

 

 

 

 

 

 

 

 

 

107