INSTANT PLAYBACK

After an image is captured, it can be displayed on the monitor before being saved. When in continuous-advance or bracketing mode, an index display is used (p. 70).

Instant playback is activated with a menu; see “navigating the auto-recording mode menu” section on page 38. In multi-function recording mode, instant playback is set in the custom 2 section of the multi-function recording menu (p. 50). When used with voice memo, the audio recording will begin after the image is played back.

Menu setting

 

 

 

No

Instant playback is disabled.

 

 

2 sec

The captured image will be displayed for two or ten seconds. While dis-

10 sec

played, the image can be deleted before being saved.

 

 

If the center of the controller is pressed during the instant playback, the displayed image will immediately be saved and the playback can- celed.

Controller

Auto

QV/delete

button

: delete : store

1To delete an image during the instant playback, press the QV/delete button.

•A confirmation screen will appear.

•When using continuous advance or bracketing, the entire series will be erased.

2Use the left/right keys of the controller to highlight “YES.”

•“NO” will cancel the operation.

3Press the controller to delete the image.

•The live image will be displayed on the monitor.

45