GETTING UP AND RUNNING

CHANGING BATTERIES

This digital camera uses four AA-size alkaline batteries. AA-size Ni-MH batteries can also be used, and are recommended because of longer life. When using Ni-MH batteries, fully recharge them with a battery charger suitable for complex electronic equipment. Please consult your vendor about an appropriate charger.

When replacing batteries, check that the mode dial is in the off position.

3

1

2

Open the battery-chamber door by moving the battery-chamber lock (1) to the open position . Slide the door forward (2) to release the safety catch; the door should spring open (3).

Insert the batteries.

•Make sure the positive and negative battery terminals are orientated as illustrated on the diagram in the battery chamber.

5

4

Close the battery-chamber door and slide it back toward the body (4) to engage the safety catch. Move the lock lever (5) to the close position .

•After installing the batteries, the set-time/date message may appear an the monitor. Reset the clock and calender in the custom 2 section of the setup menu (p. 84).

16