DATA-TRANSFER MODE

DISCONNECTING THE CAMERA FROM THE COMPUTER

Never disconnect the camera when the access lamp is lit – the data or

CompactFlash card may permanently be damaged.

WINDOWS 98 AND 98SE

Confirm that the ‘access lamp’ is not lit. Turn the mode dial to another position and then disconnect the USB cable.

WINDOWS ME AND WINDOWS 2000 PROFESSIONAL

To disconnect the camera, click once on the unplug-or-eject-hardware icon located on the task bar. A small window will open indicating the device to be stopped.

Click on the small window to stop the device. The safe-to- remove-hardware window will appear. Click “OK.” Turn the mode dial to another position and then disconnect the USB cable.

When more than one external device is connected to the computer, the unplug-or- eject-hardware window can be used. To disconnect the camera, double click on the unplug-or-eject-hardware icon located on the task bar to activate the window.

102