PLAYBACK MODE

VIEWING IMAGES ON A TELEVISION

It is possible to view camera images on your television. The camera has a video-out terminal to make the connection using the supplied AV cable. The camera is compatible with the NTSC and PAL standards. The video-output setting can be checked and set in the Custom 2 section of the setup menu (p. 84).

1. Turn off the television and the camera.

2

 

2. Insert the mini-plug end of the AV cable into the camera’s video-out terminal.

3. Plug the other end of the AV cable into the video and audio input terminals on the television.

• The yellow plug is for the video output. The white plug is for the monaural audio output.

• The audio output will also be heard through the camera’s speaker while connected to a television.

4. Turn the television on.

5. Change the television to the video channel.

3

6.Turn the camera’s mode dial to the playback position.

•The camera’s monitors will not activate when the camera is attached to a television. The playback-mode display will be visible on the television screen.

7.View images as described in the playback section.

82