Using PageScope Light 6
Scanner Mode & Page Scope Light 6-3
6.2 Accessing PageScope Light
Note
In order to use PageScope Light, the IP address must be set in
advance. (Refer to “Specifying the IP Address” on page1-8.)
PageScope Light can be accessed through a Web browser.
1Start up the Web browser.
2In the Address bar, type the IP address of the controller in the form at
shown below, and then press the computer keyboard’s [Enter] key.
http://controller_IP_address/
(Example) If the controller IP address is 192.168.0.10:
http://192.168.0.10/
3The initial page of PageScope Light appears.
Note
If your Web browser is set to use a proxy server, it may not be able to
access PageScope Light. In this case, specify the IP address of the
printer/scanner controller as an exception for access through the
proxy server.
(Example) With Internet Explorer 5
1Click [Tools] in the menu bar, and th e n c lic k [I n te rn e t O p ti on s .. ..].
2Click the [Connections] tab.
3Click the [LAN Settings] button.
4Click the [Advanced] button in the “Proxy server” group box.
5Type the IP address of the printer/scanner controller into the
“Exceptions” list box.