LOADING FILM

4. Press the film-chamber door closed until it clicks.

• The data panel will display the cassette mark and the film’s ISO, then the number of frames remaining on the roll.

•After the film is loaded, the film chamber cannot be opened until the film has been rewound.

•Film can be loaded when the camera is on or off. If film is loaded with the camera off, all indicators in the data panel will disappear after the number of frames remaining is displayed.

22

If 0 blinks in the data panel, press the film-chamber release, open the chamber, then remove the film.

-If the film’s current VEI is , insert a new roll of film.

-If a partially exposed roll of film was loaded into this camera, the VEI has been changed from to .

-If a processed roll of film was loaded into this camera, the VEI has been changed from to .

-If the film’s current VEI is , remove the film, remove and reinsert the battery, then reload the film. If the film will not load, contact the nearest authorized Minolta Service Facility.

23