Konica Minolta Vectis 300l APPENDIX, the old battery, CHANGING THE BATTERY, 1. Pull out the battery chamber and remove, 3.Slide the battery chamber back into the remote control

REMOTE CONTROL (Sold Separately)

CHANGING THE BATTERY

The remote control uses a 3V lithium battery (CR2032). When pressing the remote-control buttons does not release the shutter, the battery must be replaced. A new battery should be sufficient for approximately ten years of operation.

1. Pull out the battery chamber and remove	APPENDIX
the old battery.

2. Insert a new battery into the battery chamber with its plus side up.

3.Slide the battery chamber back into the remote control.

66 67