REMOTE CONTROL (Sold Separately)

The IR Remote Control RC-3 (not included) allows remote camera operation from up to 5m (16 ft.) away.

•The distance may be shorter or the remote control may not operate with backlit subjects,

under fluorescent light, or in extremely bright lighting conditions.

1. Place the camera on a tripod, then press the remote-control button until appears in the data panel.

2. Compose your picture.

Emitter window

Delay button

Release button

3.Point the remote control with its emitter window toward the front of the camera

and press • or 2s button.

•Release (•): the remote-control lamp will blink once, and the picture is taken immediately. Delay (2s): the remote-control lamp will blink for two seconds before the picture is taken.

•Remote control mode will remain selected after the picture is taken.

•To save power, the data panel will shut off and the lens will retract if the remote control is not operated for more than eight minutes.

62

Continued on following page.

63