INSTALLING THE BATTERY

Your camera uses one 3-volt CR-2 lithium battery to supply power for all camera operations.

1. Open the battery chamber as shown.

2. Insert the battery into the chamber as indicated by the + and – marks.

3. Close the battery chamber.

• After installing a new battery, reset the date and time (p. 48).

16

CHECKING THE BATTERY

Each time the main switch is turned on, a symbol will appear in the data panel to indicate the power status of the battery.

Briefly appears. Power is sufficient for all camera operations.

Power is sufficient, but the battery must be replaced soon.

Replace the battery. The shutter will lock until the battery is replaced.

Continued on following page.

17