INSTALLING AND REMOVING A MEMORY CARD

Always turn off the camera and confirm the indicator lamp is not lit before changing the memory card, otherwise the card may be damaged, and data lost.

This camera has approximately 15 MB of internal storage so images can be recorded without a memory card. For more memory capacity, an SD (Secure Digital) Memory Card or MultiMediaCard can be inserted into the camera. When a card is inserted, images are saved on the card. For more about memory cards, see page 108.

3. To eject a memory card, press the card into the slot and

 

release. The card can now be pulled out.

3

 

4. Close the card-chamber door

4

and slide it toward the camera

 

to engage the safety catch.

 

1.Slide the card-chamber door toward the back of the camera to release the safety catch. Open the door.

2.Insert the memory card all the way into the card slot and then release. The card should catch in the slot.

Insert the card so the face is toward the back of the camera. Always push the card in straight, never at an angle. Never force the card. If the card does not fit, check that it is orientated correctly. If a MultiMediaCard is inserted incorrectly, it will lock, but the card chamber door will not close.

1

2

INTERNAL-MEMORY INDICATOR

The internal-memory indicator in the recording and playback modes indicates the cam- era’s internal memory is being used. When a memory card in inserted in the camera, the internal memory cannot be used or accessed.

TURNING THE CAMERA ON

To turn the camera on, slide the lens cover open in the direction indicated in the illustration. When the camera is initially turned on, the date and time need to be set, see the following page. The monitor may turn off for a few seconds while the flash charges when the camera is turned on.

Slide the lens cover in the opposite direction to turn off the cam- era. Always store and transport the camera with the lens cover closed.

18 Getting up and running

19