With the camera properly connected to WindowsMy Computer: Windows
XP or Mac OS X, a window may open to down-Desktop: Mac OS
load image data; follow the instructions in the
window. A drive icon, or volume, appears in My

 

Computer or the desktop; the name varies with

 

memory card and operating system.

 

CONNECTING TO WINDOWS 98 AND 98SE

The driver needs only to be installed once. If the driver cannot be installed automatically, it can be installed manually with the operating system’s add-new-hardware wizard; see the instructions on the following page. During installation, if the operating system requests the Windows 98 CD-ROM, insert it into the CD-ROM drive and follow the accompanying instructions on the screen. No special driver software is required for other Windows operating systems.

Automatic Installation

Before connecting the camera to the computer, place the Digital Camera Software CD-ROM in the CD-ROM drive. The launcher should automatically activate. To automatically install the Windows 98 USB driver, click on the “Install the Windows 98 USB Mass-Storage Driver” button. A window appears to confirm that the driver should be installed; click “Yes” to con- tinue.

A message appears when the driver has been successfully installed. Click “OK.” Restart the computer before connecting the camera (p. 81).

Manual Installation

To install the Windows 98 driver manually, follow the instructions in the connecting-the-camera-to-a-computer section on page 81.

When the camera is plugged into the computer, the operating system will detect the new device and the add-new- hardware-wizard window opens. Place the Digital Camera Software CD-ROM in the CD-ROM drive. Click “Next.”

Choose the recommended search for a suitable driver. Click “Next.”

Choose to specify the location of the driver. The browse window can be used to indicate the driver location. The driver should be located in the CD-ROM drive at :\Win98\USB. When the location is shown in the window, click “Next.”

82 Data-transfer mode

83