PICTBRIDGE

Confirm the transfer-mode option in section 3 of the setup menu

is set to PictBridge. To print the images in the camera’s internal

memory, remove the memory card from the camera. Connect

the camera to a PictBridge compatible printer using the cam-

era’s USB cable. The larger plug on the cable is connected to

the printer. Open the AV out/ USB port cover and insert the

smaller plug of the cable into the camera. Insert the plug in

straight, never at an angle. Turn the camera on; the PictBridge

screen is displayed automatically.

Reset default

No. of prints:

7

Print size:

Printer setup

Layout:

Printer setup

Print quality:

Printer setup

Data print:

Printer setup

:start

 

The number of prints in the print run are displayed as well as the print parameters selected with the menu. See the menu navigation section for more information (p. 96). Press the central button of the controller to begin printing, or press the menu button to return to the PictBridge screen.

Printing finished.

Individual still images can be selected for printing on the

Date/Time set

 

 

PictBridge screen. For other printing options, see the menu navi-

 

 

 

Video out

Data storage

 

gation section on page 96.

 

Transfer mode

Remote camera

 

 

 

The zoom lever can be used to switch between single-frame,

 

PictBridge

 

 

 

 

index, and enlarged display formats.

 

 

 

Total number of prints

Number of copies

Use the left/right keys of the controller to display

the image to be printed.

 

Press the up key to select the number of copies to be printed. To deselect an image for printing, press the down key until the number of copies reaches zero.

Repeat the previous steps until all the images to

be printed are selected. Press the central button of the controller to continue.

:move :select :print

Once printing begins, the operation can be canceled by pressing the

center of the controller. The printing-finished message indicates the endOK of the operation; turn the camera off to end the routine.

NOTES ON PRINTING ERRORS

If the battery is exhausted before the print run is complete, printing is canceled. Use a fully-charged battery or the optional AC adapter.

If a minor problem occurs during printing, such as the paper runs out, follow the procedure recommended for the printer; no action is required for the camera. If a major printer error occurs, press the center of the controller to end the routine. Refer to the printer manual for the correct procedure for the printer problem. Check the printer settings before starting again and deselect the images that were printed.

94 Data-transfer mode

95