Press shutter button to record.

Microphone

Recording audio.

Press shutter to stop.

Remaining recording time

Stop Vol.

Test custom recording?

YesNext

Save custom recording?

YesNo

Press the shutter-release button to begin the recording of the shutter sound effect.

During the recording, hold the camera’s microphone approximately 20cm (8in) from your mouth. Up to five seconds of audio can be recorded. The remaining recording time is indicated by a status bar and the frame counter on the

monitor. The recording will end when the shutter-release button is pressed again or recording time has elapsed.

The length of the recording will affect the performance of the camera. The longer the recorded sound effect, the longer the delay between image capture. This can have a significant affect on the continuous-advance frame rate.

To test the recording select and enter “Yes.” During playback, the up/down controller keys control volume and the menu button cancels the playback. Select and enter “Next” to continue.

To save the shutter sound effect and replace any previous recording, select and enter “Yes.” “No” will cancel the operation.

Once saved the sound effect can be recalled anytime by selecting the custom setting from the shutter -FX option on the setup menu.

79