CONNECTING THE CAMERA TO A COMPUTER
A fully charged battery should be used when the camera is connected to a computer. The use of the AC adapter (sold separately) is recommended over the use of the battery. For users with Windows 98 or 98SE, read the section on page 86 on how to install the necessary USB driver before connecting the camera to a computer.
1.Start up the computer. The computer must be turned on before connecting the camera.
2.Insert the memory card into the camera. To change the memory card while the camera is connect- ed to a computer, see page 94.
3.Slide the
small plug of the USB cable into the camera. Make sure the plug is firmly attached.
4. Attach the other end of the USB cable to the computer’s USB port. Make sure the plug is firmly attached. The camera should be connected directly to the computer’s USB port. Attaching the camera to a USB hub may prevent the camera from operating properly.
5 Turn on the camera to initiate the USB connection. While the camera is connected to a computer, the
The charger can be used as a camera stand. When the camera is on, the charger does not charge or supply power to the camera.
84