Connect the camera to the printer using the camera’s USB cable. The larger plug on the cable is connected to the printer. Slide open the USB-port cover and insert the smaller plug of the cable into the camera. Turn the camera on. The USB Direct Print screen will be displayed.

Number of prints in the print run.

Strike through indicates unprintable file type.

Number of copies of the displayed image.

Use the left/right keys of the controller to display the image to be printed.

Press the up key to select the number of copies to be printed. A maximum of nine copies can be selected. To deselect an image for printing, press the down key until the number of copies reaches zero.

:move :sel. :print

The display button switches between the

 

Repeat the previous steps until all the

single frame and index playback formats.

 

images to be printed are selected. Press

 

 

 

the central button of the controller to

 

 

begin the printing routine.

Print file?

Number of prints: 7

The number of prints in the print run are displayed on the LCD moni- tor. Use the left/right keys to highlight “Yes,” and press the center of the controller to start printing.

YesNo

Printing finished.

OK

Once printing begins, the operation can be canceled by pressing the center of the controller. The printing finished message will indicate the end of the operation; turn the camera off to end the routine.

95