20

The local control setting

Keyboard/Each controllers
Computer K61P
KBD/KNOB
SOUND/CTRL Tone generator
Local control on
Computer
KBD/KNOB
SOUND/CTRL
Local control off
Keyboard/Each controllers
K61P
Tone generator
The local on/off setting is set to local on if power cut off.
Program change enable/disable
Every time you select one of the K61P’s internal sounds, a MIDI program change
message is also sent to any connected MIDI equipment. This feature allows you to
prevent program change messages from being sent to your other MIDI devices.
1Hold down [BANK] button until the K-Series enters the Setting mode.
2Press the Program 7 [HARPSI 1/VIBE/STRINGS 1] button (the button will flash).
C8C7C6C5C4C3C2C1
3Press note C4(enable) or C#4(disable) to select the setting.
4Press the [BANK] button to exit the Setting mode.