Korg K25, K49, K61, K61P Using the internal sound engine [K61P only]

9
Owner’s Manual
4Set the power switch to the DC position. The power LED will light. When the pow er
is turned on, the most recently saved settings will be recalled automatically.
5Turn on any external MIDI sound modules connected to your K-Series controller.
MIDI IN
MIDI OUT
Pedal switch
MIDI cable
External MIDI sound module
PEDAL jack
Power switch position
Plug the AC
adaptor into
an AC outlet
Power supply connector
6When you are ready to turn off the power, turn off any external MIDI sound mod-
ules first, and then set the K-Series power switch to STANDBY.
Using the internal sound engine [K61P only]
1Connect the plug of the optional AC adapter to the K-Series power connector, and
plug the adapter into an AC outlet.
2Using standard instrument cables with 1/4” plugs, connect the output jacks on the
K61P to the inputs of your audio monitor system or audio recorder. When connect-
ing only one output, use the L/MONO jack only.
Use the volume knob to adjust the level of the OUTPUT jacks.
3Set the power switch to the DC position. The power LED will light.
4Turn on your connected audio monitoring system.
Headphone
Amplified speakers HEADPHONES jack
OUTPUT jack
INPUT