Koss KS5121 manual Audio Setting, Jpeg Interval, Progressive Scan, Digital Output, Down Sampling

STEP 1:

STEP 2:

The setting will change to Progressive Scan ON.

TV with PROGRESSIVE SCAN is needed, otherwise picture will be distorted or no picture.

To resume NON-PSCAN picture, press (V. Select) key a few times until picture is OK.

Do you want to continue?

No, keep using component output.

Yes, switch to Progressive Scan output.

2.5JPEG Interval

1.Use or button to select Video and press OK.

2.Use or button to select JPEG Interval and press OK.

3.Press OK repeatedly to select among 5 Seconds, 10 Seconds and 15 Seconds.

4.Use button to return to the main menu bar.

2.6Progressive Scan

1.Use or button to select Video and press OK.

2.Use or button to select Video Out and press OK.

3.Use button to shift to P-SCAN, and press OK to confirm selection.

4.A warning message will follow, select Yes and press OK to confirm.

5.Use button to return to the main menu bar.

Note: No video output when your TV system

does not support progressive scan in.

3. AUDIO Setting

3.1Digital Output

1.Use or button to select Audio and press OK.

2.Use or button to select Digital Output and press OK.

3.Press OK repeatedly to select among Digital Output options or turn the Digital Output off.

4.Use button to return to the main menu bar.

3.2 Down Sampling

1.Use or button to select Audio and press OK.

2.Use or button to select Down Sampling and press OK.

3.Press OK repeatedly to select between 96K and 48K.

4.Use button to return to the main menu bar.

Page 11