Kramer Electronics user manual Your FC-4046Video MultiCoder

Your FC-4046 Video MultiCoder®

In addition, the FC-4046:

￿￿Includes analog inputs and outputs compatible with the formats and standards in use today

￿￿Is highly automated for hassle-free operation

￿￿Includes user-friendly front panel buttons for full Procamp control

￿￿Labels each dipswitch for easy and convenient identification

￿￿Automatically recognizes the input video standards1: PAL B/D/G/H/I, NTSC3.58 and SECAM

￿￿Can output PAL B/D/G/H/I/Nc/60 and NTSC3.58/4.432

￿￿Has CV, YC and component3 inputs and outputs

￿￿Simultaneously outputs to CV, YC and component (RGB or YUV) formats

￿￿Can be used as a multi-format switcher, always converting to all the formats

￿￿Includes non-volatile memory that retains the last setting, after switching the power off and then on again

￿￿Is controllable via the front panel buttons, and/or remotely by RS-232 serial commands transmitted by a touch screen system, PC, or other serial controller

To achieve the best performance:

￿￿Connect only good quality connection cables, thus avoiding interference, deterioration in signal quality due to poor matching, and elevated noise levels (often associated with low quality cables)

￿￿Avoid interference from neighboring electrical appliances that may adversely influence signal quality

￿￿Position your Kramer FC-4046in a location free from moisture and away from excessive sunlight and dust

4 Your FC-4046 Video MultiCoder®

Figure 1 illustrates the front and rear panels of the FC-4046. Table 1 and Table 2 define the front and rear panels of the FC-4046, respectively.

1 When the fifth dipswitch, AUTO, is set to ON for the multi-standard

2 Only supporting actions that are capable of performance. For example, you cannot convert the PAL standard to NTSC

3 Note that this unit does not scale or scan convert the signal. For example, a PAL input would produce 50Hz interlaced output on the RGB output

2 KRAMER: SIMPLE CREATIVE TECHNOLOGY