Kramer Electronics user manual Connecting the FC-4046Video MultiCoder

Connecting the FC-4046 Video MultiCoder®

6 Connecting the FC-4046 Video MultiCoder®

To connect the FC-4046, as the example in Figure 2 illustrates, do the following1:

1.Connect one or more of the following sources:

￿￿A composite video source (for example, a camera) to the CV INPUT BNC connector

￿￿A Y/C source (for example, an s-Video player) to the 4p INPUT connector

￿￿A component video source (for example, a DVD Player) to the G/Y, B/B-Y, and R/R-Y INPUT BNC connectors

2.Connect the OUTPUT:

￿￿CV BNC connector to the composite video acceptor (for example, a composite video display)

￿￿4p connector to the s-Video acceptor (for example, an s-Video display)

￿￿G/Y, B/B-Y, and R/R-Y BNC connectors to the component video acceptor (for example, a projector)

3.Connect the power cord.

4.Connect a PC or other RS-232 controller (optional), see section 6￿ .1.

5.Set the dipswitches, see section 6￿ .2.

1 Switch OFF the power on each device before connecting it to your FC-4046. After connecting your FC-4046, switch on its power and then switch on the power on each device

7